Three Challenges!

I know it's been a while, but I just can't seem to always get things posted in a timely manner! LOL!  I always have good intentions...but...you know what they say about good intentions! I did manage to get three cards made and I'm actually getting them posted!

I did get a couple of cards made for the Twofer Challenge...and one of them fits the sketch for the CAS(E) this Sketch challenge.  The flower card also fits in with The Flower Challenge.  

 Here's my cards for the Twofer Challenge which is "hearts".

As you can see by the strip of "hearts" in front of the cards...this is the stamp I've used for two different cards. 

The stamp is from PTI (and I've had it forever!) and is a single heart that I've stamped several times.  The card on the right was made by stamping the hearts down a strip of paper.  I layered the white stamped strip on a piece of red card stock and adhered to the card base.  The sentiment is also from PTI and was heat embossed in white on a piece of the red card stock and then punched with a heart punch.  I added tiny dots of white with a gel pen. 

This card was made by stamping the hearts and cutting them out.  I paper pieced the hearts to a circle cut from red card stock.  I hand cut the flower stem and leaves from green card stock. Sentiment is from PTI.  I added a large pearl to the center of the flower and heat embossed the sentiment with black embossing powder.

This card doesn't really fit a challenge that I know of...it's just one that I made for my son's birthday which will be on the 24th of this month.  My baby....he'll be 39!!! WOW! Where does the time go!!!  I used a really old SU set for the leaf and the background.  The Happy Birthday sentiment is from PTI.  I cut the bottom point using a large hexagon die, then added the strips of brown on top of it.  I also scored lines across the top and down the sided of the white.

As always, thanks so much for stopping in.  I appreciate your visit...and I appreciate each and every comment!

CASE this Sketch #254

It's been a long time since I've played along with a challenge, and I needed something to kick start my mojo!  I found this sketch at CAS(E) this Sketch #254.

Thinking about all the birthdays and anniversaries coming up in the next few months, I realized that my card supply is really bare, so I need to get busy and make some cards!

Here's my card for the challenge...

I decided to do a white on white with just a tiny pop of color. The only stamping on the card is the heat embossed Happy Birthday.  Everything else is cut with a die. I added some dots of NUVO crystal for just a pop of shine.

As always, thanks so much for stopping in.  I appreciate your visit...and I appreciate each and every comment!

LIM #313 - Balloons

It just so happened that I just made a card this morning that fits perfectly with the LIM challenge for this week!  I needed a card for a new baby, so I made this cute little gift card holder card. 

The only part that opens on this card is the light blue striped piece on the very front of the card base (and is the actual card).  The flap that says "welcome Ezra" is held down by the elephant's trunk.  When you slide the sentiment tab out from under the elephant's trunk, the card will open to display a gift card and a message.  The elephant is from W Plus 9 Unforgettable set, the "welcome" part of the sentiment is from PTI, and the name was stamped with Concord and 9th's Perfectly Penned set. The sentiments was stamped in versamark and heat embossed with white.  I colored the elephant and balloon with Copics and cut them out to pop on the front of the card. I would say this was a quick and easy card...and it probably would have been if I hadn't totally messed up the elephant's eyes on the first one I cut out...so that meant that I had to re-stamp, re-color, and cut another one out! Other than that little mess up, it was quick! LOL!

As always, thanks so much for stopping in.  I appreciate your visit...and I appreciate each and every comment!

Whoosh....It's Almost Christmas!

Seems as though we just got started on 2016....and here we are at Christmas 2016 already!  WHERE does the time go!  I've been SO busy since Thanksgiving!  There were presents to buy, house to decorate, food to cook, presents to wrap, company coming, baking yet to be done, birthdays galore...and more! I hosted the annual Christmas party for the widows group from my church...we had 16 in attendance.  I cooked a great meal for everyone, we played games, wrote Christmas cards to the home bound folks from church, and did a lot of talking and visiting.  After 4 hours, I was exhausted!...but a good kind of exhausted ♥

In between all these chores (okay, some of the chores were fun☺), I managed to make a few Christmas cards (which I've yet to address and mail!)...Thought I'd share them with you today.  This will be a PHOTO HEAVY post for sure! To view any of the cards larger, just click on the image.

 
I'd list all the products used for the cards, but you'd still be trying to read through this blog post next week!  So....if you have any questions about products or techniques on any of the cards, just click on the envelope at the top of the blog that says contact me, and shoot me an email with your question and I'll get back to you as soon as I can!

If you've hung in this long...you're a real trooper!  Thanks a $Million!

As always, thanks so much for stopping in.  I appreciate your visit...and I appreciate each and every comment!

Sad Cards

Sometimes you just need a sympathy card.  Unfortunately, I needed a couple of sympathy cards this week and realized that I didn't have a single one in my stash!  So, I set to work getting the ones I needed made and a few extras. It's never fun to make sympathy cards, but if you make several of them at one time, then it doesn't seem quite so bad.  Praying that I DON'T need them any time soon!

I think all of these cards would be eligible for the HLS August Anything Goes Challenge, so I think I'll link up with Happy Little Stampers!

Warning...this post is photo heavy!

Very simple card. Die cut the butterfly (MB) from grey card stock, and then cut the bottom off of the panel with a SU die. I inserted the butterfly back into the card panel using some foam tape to pop it off the card base and keep it in place. I popped the panel with craft foam onto a white card base.  Sentiment is from HA and is stamped in HA soft granite ink.

This was a very quick and easy card.  Cut a yellow panel slightly smaller than the card base. Used a distressed corner die (MB) and then embossed the panel with a large embossing folder.  Sentiment is from HA and is embossed in silver.  Panel is popped over the card base with craft foam.

This card and the next card were created with the same papers.  I embossed the white card stock with the same embossing folder I used on the yellow card.  I also embossed the black and a grey strip with two different embossing folders.  One the card above, I added a small strip of dull silver paper between the black and grey.  The bloom the leaves are from Altenew and are colored with Copics.  I stamped the sentiment on vellum and heat embossed with silver. The flower is popped on the panel, the panel is adhered directly to the card base.

I made this card with the leftovers from the previous card.  The leaves were cut with the Cameo. Sentiment is from PTI and is heat embossed in silver.

I think these next two are my fall-to designs.  I simply die cut the flower (SSS) from both a white panel and a craft panel.  I backed the panel with double sided tape and inserted the flowers in to the opposing colored panel. The sentiment was stamped and heat embossed in liquid platinum on a strip of vellum.  Panel is adhered directly to card base and corners were rounded with a corner chomper.

This is the second card panel.  I inserted the craft bloom into the white card base, added a small border of craft around the edges and heat embossed the sentiment (HA) with liquid platinum.

This is actually grey card stock.  I cut a panel with a stitched rectangle die (SSS), then cut the square from that panel with a double stitched edge die (MFT). The flowers stamps are from HA.  I stamped the image and scanned it into my Silhouette program and made a cut file for these flowers.  Having a die is always much easier to cut out an image, but when there isn't a die, I'm glad I have my Cameo to make the cut for me!  I colored the blooms with Copics. I popped the rectangle panel with some craft foam, then cut the center out so that I could put the square stitched piece down into the hole.  I put the flower stems under the larger panel and over the inset panel with on bloom  hanging over the edge.  Added a few liquid pearl drops.  Sentiment is from HA and heat embossed with liquid platinum.

Thanks so much for stopping in.  I appreciate your visit...and I appreciate each and every comment!

CASology, Less is More, CAS(E) this Sketch, Simon Says Stamp...and more!

Got LOTS of cards to share with you today.  This post is very photo heavy!  I've made cards that fit in several challenges...I'm really on a roll this week!  

First up is my card for the CASology Challenge and the Simon Says Wednesday Challenge (one layer).

I used a Spellbinder die for the lacy heart and cut it from the card front.  I masked off the same size heart on the inside of the card and inked it up with some distress inks.  I added a touch of clear Wink of Stella to the lacy heart.  The sentiment from SSS Square Sayings was heat embossed with liquid platinum embossing powder.

My next card is for the Less is More 5th Birthday Celebration.  I don't get to play along with this challenge as often as I'd like, but I was very active when this challenge first started 5 years ago.  It's still one of my favorite challenges!

The LIM challenge this week is a white on white challenge.  I cut my butterflies with a SU! emboss folder that cuts and embosses.  I've had it forever, so I don't know if they still make it or not.  The sentiment is heat embossed in liquid platinum and is a SSS stamp.  It's difficult to see in the photo, but each of the butterflies have a touch of glitter on them.

Next up is my card for CAS(E) this Sketch

I made my background with Hero Arts ink and masking tape.  There's actually a couple of boo-boos in there, but hopefully, they're not too noticeable! The sentiment is from MFT...and I believe this is the first time this set has seen ink!  I cut the plaid panel with a SSS stitched rectangle die and stamped the sentiment in Versafine black ink.  I inked the edges of the card base with the same ink used in the plaid. (I used Mint Julep, Latte, Fresh Peach inks).

As I mentioned previously, I am in a widow's group that meet monthly.  Last month I took 15-20 of my cards and each of the ladies took a few minutes to write a note to someone on the group list that wasn't able to meet with us for lunch.  We've had some very positive feedback from some of the ladies who received cards, so I'll be taking some more cards to this month's luncheon.  

The first two are my favorites.  I love the no line coloring...I used Copics. The flowers are from Clearly Besotted  The second card I did a little ink blending with some distress inks...LOVE how this turned out. The grid die cut is from Spellbinders.

The third card was made as a one layer card and I used PTI leaf stamps and the sentiment is from Winnie & Walter.  On the last card I used the same Clearly Besotted image, stamped in black and colored with Copics.  I added a few drops of shimmer and some white dots for the flowers.  I reached waaaaaay back in my memories and thought about torn edges...and just went with it.  I think I like it!

I know this has been a VERY PHOTO heavy post...if you made it here to the end...bless you!

If you have any question about any of the cards, drop me an email and I'll get back to you!

Thanks so much for taking the time to stop by for a visit!  Hope you'll come back soon!  Your comments are greatly appreciated! Until next time...